SPECIFICATION

• MODEL 3SGM2.5/20:
• POWER (HP) : 1.0
• VOLTAGE (V): 240
• OUTLET (INCH): 1"
• MAX FLOW (L/MIN): 60
• MAX HEAD (M): 83
• MAX IMMERSION (M): 70
• HEAD RANGE (M): 82-39

SPECIFICATION

• MODEL 3SGM2.5/10:
• POWER (HP) : 0.5
• VOLTAGE (V): 240
• OUTLET (INCH): 1"
• MAX FLOW (L/MIN): 60
• MAX HEAD (M): 41
• MAX IMMERSION (M): 70
• HEAD RANGE (M): 41-20

SPECIFICATION

• MODEL 3SGM2.5/25:
• POWER (HP) : 1.5
• VOLTAGE (V): 240
• OUTLET (INCH): 1"
• MAX FLOW (L/MIN): 60
• MAX HEAD (M): 104
• MAX IMMERSION (M): 70
• HEAD RANGE (M): 102-49

INTRODUCTION:
* OUR 4SG(M) 4 INCH DEEP WELL PUMP IS A HIGHLY RELIABLE MOTOR FOR USE IN WELLS UP TO 4 INCHES IN DIAMETER OR LARGER. THE WATER OUTLET HAS A BUILT-IN CHECK VALVE TO PREVENT BACKFLOW SEDIMENTATION. IT MAKES THE PUMP START MORE EASILY, WHICH EFFECTIVELY EXTENDS THE LIFE OF THE MOTOR AND MAKES 4SG(M) 4 INCH DEEP WELL PUMP LAST LONGER.

PERFORMANCE RANGE:
* MAX. FLOW: 22M3/H
* MAX. HEAD: 454M

APPLICATION LIMITS:
* MAX. AMBIENT TEMPERATURE< 40
* SAND CONTENT(IN MASS FRACTION)UP TO 0.01%
* HYDROGEN SULFIDE CONTENT UP TO 1.5MG/L, CHLORIDEION CONTENT UP TO 400MG/L
* PH 6.5 TO 8.5
* MAXIMUM: 70 M BELOW THE STATIC WATER TABLE.

INTRODUCTION:
* OUR 4SG(M) 4 INCH DEEP WELL PUMP IS A HIGHLY RELIABLE MOTOR FOR USE IN WELLS UP TO 4 INCHES IN DIAMETER OR LARGER. THE WATER OUTLET HAS A BUILT-IN CHECK VALVE TO PREVENT BACKFLOW SEDIMENTATION. IT MAKES THE PUMP START MORE EASILY, WHICH EFFECTIVELY EXTENDS THE LIFE OF THE MOTOR AND MAKES 4SG(M) 4 INCH DEEP WELL PUMP LAST LONGER.

PERFORMANCE RANGE:
* MAX. FLOW: 22M3/H
* MAX. HEAD: 454M

APPLICATION LIMITS:
* MAX. AMBIENT TEMPERATURE< 40
* SAND CONTENT(IN MASS FRACTION)UP TO 0.01%
* HYDROGEN SULFIDE CONTENT UP TO 1.5MG/L, CHLORIDEION CONTENT UP TO 400MG/L
* PH 6.5 TO 8.5
* MAXIMUM: 70 M BELOW THE STATIC WATER TABLE.

FEATURES:

• AMBIENT TEMPERATURE UP TO 40OC
• THE ALTITUDE AT THE INSTALLATION SITE IS LESS THAN 1000MTR
• AMBIENT HUMIDITY 10-90%RH (NON-CONDENSING)
• MAXIMUM WORKING PRESSURE: 10 BAR
• PROTECTION CLASS: IP55
• INSULATION CLASS: F
• FREQUENCY CONVERTER: CLASS IP65 PROTECTION
• OVERFLOWING PARTS OF PUMP MADE OF STAINLESS STEEL 304
• INVERTER – AUTOMATICALLY ADJUST THE CONSTANT PRESSURE AND VARIABLE FREQUENCY WATER SUPPLY. OPTIMAL ENERGY-EFFICIENT.

APPLICATION FIELDS

• AIR CONDITIONER SYSTEM
• AQUACULTURE
• COOLING SYSTEM
• INDUSTRIAL CLEANSING
• ENVIRONMENTAL APPLICATION
• WATER PROCESSING(WATER PURIFICATION)
• FERTILIZATION/MEASURING SYSTEM
• OTHER SPECIAL APPLICATIONS

APPLICATION LIMITS 

• TEMPERATURE RANGE OF MEDIUM: NORMAL TYPE 0~+68℃, HOT WATER TYPE 0~+120℃
• MAXIMUM AMBIENT TEMPERATURE: +40 ℃
• MAXIMUM WORKING PRESSURE: 10 BAR
• WHEN THE DENSITY OR VISCOSITY OF THE TRANSMISSION MEDIUM EXCEEDS THAT OF WATER, IT IS NECESSARY TO SELECT A DRIVING MOTOR OF HIGH-POWER.
• PH: 6.5 TO 8.5