Price | RM28.01 |
Product SKU | 7500103A1L |
Brand | Seamaster |
Size (L x W x H) | 16 cm x 16 cm x 18 cm |
Availability | In Stock |
Quantity |
|
Description
Highlight
- Low VOC
- APEO
- Interior
- Water
- Satin Finish
Dear our beloved customer, please take note that for order of 15L, 1 order 1 tin of 15L only. |
If you would like to purchase 2 tin of 15L, kindly place 2 orders. |
Thank you!!! |
PRODUCT DECRIPTION |
Seamaster Silk Pro Easy Wash Finish brings your interior to life with satin finishing. Silk Pro is washable, has good adhesion and resists alkaline and unwanted fungi well. As you slip into your silk pyjamas, your interior goes to sleep wrapped in satin walls. Breathe through the night peacefully amongst your walls that has low odour and is free from harmful chemicals. |
USES |
As a Specially formulated for protection and decoration of interior masonry and other surfaces such as plaster wall, cement, gypsum board, brickwork, hard and soft boards and on appropriately primed wood surfaces. |
SURFACE PREPARATION |
New Masonry Surface: |
It is crucial that ample time is allowed for the concrete /plaster surfaces to dry out. High moisture content is a common cause for premature paint failures, such as blistering, discoloration, etc. Concrete/plaster are alkaline in nature and together with the presence of salts and moisture may cause paint systems to fail prematurely. Masonry surfaces must be reasonably dry and free from oil / grease and other contaminants before an appropriate alkali resistance sealer is applied. |
Old Unpainted/previously Painted Masonry Surface: |
Surface must be dry and free from any structural damaged and cracks.Wash the surface to remove any stains, debris and powderiness before application with Seamaster Silk Pro Easy Wash Finish (7500G). |
Method of Application |
Brush, roller or spray |
Product Preparation |
Ready for use after thoroughly stirring. However, if thinning is required, not more than 5 % of water may be added for the first coat. For best result,thinning is not recommended for the subsequent coats. |
Product Application: |
Touch dry : ≤ 30min |
Hard dry : ≤ 1 hour |
Recoating Interval : 3 hours |
Therotical Coverage : 11-13 m²/litre |
Application : Brush, roller or spray |
STORAGE CONDITION |
Air tight, store in dry and cool condition. |